Lewitt BEATKITPRO 7-Piece Drum Microphone Set Microphones

Description

DTP 640 REX Dual-Capsule Kick Drum Microphone
Dual-capsule for full-bodied sound
The Lewitt DTP 640 REX Dual-Capsule Kick Drum Microphone is one of the most versatile kick drum microphones available on the market. The DTP 640 REX boasts a dual-capsule design for capturing every nuance of your kick drum. The dual-capsule design is comprised of a dynamic and a condenser capsule focusing on different parts of the kick drum.

The dynamic capsule is designed to capture the kick drum’s attack, providing the punch for the kick. The condenser element is designed to capture the low-end of the kick drum, combining them together to deliver a full-bodied sound. Each of the capsules feature their own dedicated output, should you need to split the recorded tracks.

Three switchable sound modes
Another unique feature of the microphone is the integrated sound modes, which come in the form of a 3-position switch on the front. The three-position switch is accompanied by a three-position pad which allows you to cater to different recording situations and subjects. The Dynamic =//= Condenser captures both elements with a neutral frequency response.

The Dynamic +//= Condenser is designed to boost frequencies between 3 and 5kHz, with the condenser capsule remaining neutral. Dynamic +//+ Condenser includes a special dynamic range for both capsules, ensuring it delivers a full-bodied sound. The pad switch also features three settings of: 0dB, -10dB, -20dB.

MTP 440 DM Snare Drum Microphone
Rich, lively sound reproduction
Designed with high-level sound sources in mind (particularly snare drums); the MTP 440 DM employs a premium-grade capsule that delivers sonically accurate yet lively sound – capturing the punch and weight of your snare in all its glory. It delivers a refined yet gritty sound with a custom-tuned bass roll-off and defined midrange.

From the studio to the stage, the MTP 430 DM can handle a variety of sound sources with a high SPL rating allowing you to capture everything from snare drums to amplifiers and even wind instruments. Not only that, but the MTP 440 DM utilises a highly durable construction to ensure maximum durability with zinc die-cast parts and a rubber capsule suspension.

DTP 340 TT Tom and Snare Dynamic Microphone
Designed to record toms and snares
The Lewitt DTP 340 TT is a highly versatile dynamic microphone designed for capturing and recording percussive instruments, with attention to detail. The Lewitt DTP 340 TT provides you with a supercardioid capsule designed to provide off-axis rejection, ensuring optimal audio performance for snare and toms. The wide frequency range and premium-grade circuitry ensure you capture every subtle nuance of your snare or tom drum sound, retaining its natural tonality for exceptional audio quality. It reacts well to high sound pressure levels, and the adjustable mounting clip allows you to find the perfect positioning every time.

LCT 140 AIR Condenser Microphone, Matched Pair
Immersive stereo sound
The Lewitt LCT 140 AIR, Matched Pair are the perfect microphones for those looking to make great stereo recordings without breaking the bank. Rugged build? Check. High-quality sound? Check. Impressive range of onboard features? Check. This small-diaphragm condenser certainly ticks all the boxes! Thanks to its ultra-discrete design, the LCT 140 AIR makes the recording process as transparent as possible. This allows musicians to perform freely, without having to worry about technology overshadowing their creativity. Not only will they perform better with this microphone in front of them. The higher quality performances will make your job easier!

Constructed from aluminum, the LCT 140 AIR is just as comfortable on the road as it is in the studio. The sound shaping possibilities it provides via the onboard switches allow you to audition multiple tones to find a capture that's perfect for you. Utilise the onboard filter to automatically remove undesirable low-end, whilst the pad switch allows you to get close-mic recordings of instruments with high SPL levels, free from distortion. Coming complete with a clip, pouch and windscreen, the LCT 140 AIR will be a welcomed addition to the microphone locker of any recordist.

Specifications:

DTP 640 REX:
Type: Dynamic, moving coil, Condenser, permanently polarized
Acoustical Operating Principle: Pressure gradient transducer
Transducer Ø: 31.7 mm, 1.25 in
Transducer Ø: 22.4 mm, 0.88 in
Polar Pattern: Cardioid
Frequency Range (dynamic): 20 ... 16,000 Hz
Frequency Range (condenser): 20 ... 20,000 Hz
EFR, ‘Enhanced Frequency Response' Settings:
Sensitivity, = // = FFR: 0.4 mV/Pa (-69 dBV), dynamic, 2 mV/Pa (-54 dBV), condenser
Sensitivity, + // = Dynamic EFR: 0.4 mV/Pa, -69 dBV/Pa, dynamic, 2 mV/Pa, -54 dBV/Pa, condenser
Sensitivity, + // + Dual EFR: Condenser and dynamic matched at 1 mV/Pa, -60 dBV
Equivalent Noise Level: 28 dB (A)
Max. SPL for 0.5 percent THD: 150 dBSPL, 0 dB pre-attenuation
Dynamic Range of Mic. amp. (condenser): 122 dB (A)
Pre-attenuation Pad: 0 dB, -10 dB, -20 dB
Rated Impedance Dynamic: 500 Ohms
Rated Impedance Condenser: 200 Ohms
Supply Voltage: 48 V +/- 4 V
Current Consumption: 2 mA
Connector: Gold plated 3-pin and 5-pin XLR
Cable: 1.5 m (4.95’) dual shielded Y-cable, 5-pin XLR into two 3-pin XLRs
Microphone Dimensions: 71 dia. x 158 mm, 2.8 dia. x 6.2 in
Microphone Net Weight: 755 g, 27.3 oz

MTP 440 DM:
Type: Dynamic, moving coil
Acoustical operating principle: Pressure gradient transducer
Polar pattern: Cardioid
Sensitivity: 2.5 mV/Pa, -52 dBV/Pa
Internal impedance: 500 ohms
Connector: Gold plated 3-pin XLR
Microphone enclosure: Zinc die cast
Dimensions: 39 dia. x 159 mm, 1.53 dia. x 6.25 in
Net Weight: 280 g, 9.88 oz

DTP 340 TT:
Type: Dynamic, moving coil
Acoustical Operating Principle: Pressure gradient transducer
Polar Pattern: Supercardioid
Frequency Range: 40 ... 16,000 Hz
Sensitivity: 1.4 mV/Pa, -57 dBV/Pa
Internal Impedance: 500 Ohms
Connector: Gold plated 3-pin XLR
Microphone Dimensions: Ø 41 dia. X 94 mm, Ø 1.6 dia. X 3.7 in
Microphone Net Weight: 165 g, 5.82 oz

LCT 140 AIR:
Type: Condenser, permanently polarised
Acoustical operating principle: Pressure gradient transducer
Transducer: 17 mm, 0.67 in
Polar pattern: Cardioid
Sensitivity: 14.6 mV/Pa, -36.7 dBV/Pa
Equivalent noise level: 20 dB (A), cardioid
Max. SPL for 0.5 percent THD: 135 dBSPL
Dynamic range: 115 dB (A)
Pre-attenuation pad: 0 dB, -12 dB
Low-cut filter: linear 80 Hz (12 dB/oct)
Internal impedance: 173 ohm
Rated load impedance: 1000 ohm
Supply voltage: 48 V ± 4 V
Current consumption: 7.2 mA
Connector: Gold plated 3-pin XLR
Microphone dimensions: 24 dia. x 140 mm, 0.9 dia. x 5.5 in
Microphone net weight: 66 g, 2.3 oz

Details